1/2" MPT High Limit Switch 330 Degree F. with 42" Wire Leads TRAPPED PRESSURE Shaft diameter: 3/4" hollow

Shaft diameter: 3/4" hollow

SKU: 5889

Flow rate: adjustable 2 to 8 GPM

CAT 34062 seal kit 5DX Series

6293 or 6292

1/2" MPT High Limit Switch 330 Degree F. with 42" Wire Leads TRAPPED PRESSURE Shaft diameter: 3/4" hollow1 2" MPT High Limit Switch 330 deg F. with 42" wire leads A high temperature limit switch is used on hot water pressure washers to prevent excessive water temperature. The switch is a bi metallic, non adjustable thermostat. When the bi metallic sensor expands and bends, it breaks an electrical circuit when the water reaches a pre set temperature. When the switch cools, the metal contracts and the circuit is again completed. The sensor consists of two